Our Blog

The best way to avoid orthodontic emergencies is to know how to take care of your braces properly throughout your entire treatment. However, emergencies are … well, emergencies, and sometimes no matter how cautious you are or how well you take care of your braces, the wires loosen, the bands pop, or you experience orthodontic discomfort.

Common orthodontic emergencies include broken braces, poking wires, lost or broken retainers, mouth sores, and mouth injuries sustained playing sports, which often happens when you don’t wear a mouthguard to protect your teeth and appliance.

Food

It’s important to avoid foods that can damage your braces. Most people wear braces for about two years. All chewy, sticky, crunchy, and hard foods should be avoided during that time. While this may seem like a long time to go without popcorn or bubble gum, hard foods can break the brackets of your braces and sticky foods can bend the wires. If you have a loose wire, don’t try to fix it yourself. Call Shipley Orthodontics. In the meantime, if a wire is poking into your cheek or lip and causing irritation, put wax or a wet cotton ball over it to dull the sharp edge.

Pain and Discomfort

Some discomfort is a normal part of orthodontic treatment, especially in the hours after the braces are placed on your teeth or after a recent tightening or adjustment. However, if the pain doesn’t subside in three to five days, it’s a good idea to schedule an appointment at Shipley Orthodontics. Until then, try dissolving a teaspoon of salt in an eight-ounce glass of water and gargling with the solution. Over-the-counter pain medication will relieve discomfort, too.

Playing Sports

Just because you wear braces doesn’t mean you can’t play sports. You just need to take some extra precautions. Sports-related injuries to the mouth and jaw are common. The best way to protect your mouth and your appliance is to wear a mouthguard. There are several different types of mouthguards available, so be sure to ask Dr. Thomas Shipley what’s best for you.

Brushing and Flossing

In order to keep your braces in good condition and avoid orthodontic emergencies, it’s important to brush and floss thoroughly after every meal. It’s easy for small particles of food to get trapped in your braces, and if the food isn’t removed, it gets wedged between the teeth and gums and causes plaque.

Need more tips on how to avoid orthodontic emergencies? Just ask any member of our Peoria, AZ team.

How better to spend the fall months than inside by the fireplace with a warm cup of cider and a book in hand? Dr. Thomas Shipley and our team at Shipley Orthodontics encourage you to warm up your mind this fall season with a few great books. Sure it may be easy to put off reading when balancing a hectic schedule, but reading is vital to brain development. Besides, reading is always a blast!

This week, we thought we’d ask what you or your child are reading this fall. Do you have any suggestions for must-read books this year? Out of ideas for great fall reads? Ask us for suggestions, and we would be happy to provide a few. You may also ask a local librarian here in Peoria, AZ for some ideas.

Happy reading! Be sure to share with us your fall picks or your all-time favorites below or on our Facebook page!

Dr. Thomas Shipley and our team have the experience and training to evaluate the present state of your teeth and bite, and to design a treatment plan to give you the healthy, attractive smile you picture for your future. And when you choose Invisalign^® for your treatment, you’ll be able to get an advance view of exactly what that future will look like!

How is this possible? Because when you choose Invisalign, you’re getting the benefit of some of the most advanced technology in orthodontics.

The process begins with a computerized scan of your teeth and mouth. Special scanner software creates a 3D image to capture your smile as it is now. But that’s not all. Using our customized treatment plan, Invisalign software can provide not only a model of your smile today, but an evolving model of what your smile can be. Seeing your present smile transform step-by-step into your future smile is a great motivator to follow that treatment plan!

For each step of your treatment, Dr. Thomas Shipley will provide a new set of aligners created to move your teeth and bite toward this goal. Why don’t you need a mold made of your teeth every time you get a new aligner? Because, with Invisalign, we design your aligners to fit your future tooth alignment.

Aligners are not fabricated to snugly fit around your teeth as they are, but as they will be after several days of wear. Each set is molded with small improvements to your alignment, and provides gentle, consistent pressure to move your teeth to that next step.

This “future fit” is why you may experience a bit of discomfort with a new set of aligners. Over the days that you wear them, the fit will become more and more comfortable. This won’t be because your aligners have changed. It will happen because your teeth have gradually moved where your aligners direct them.

Once your teeth and bite have reached this new step in your treatment, it will be time for the next set of aligners in the series, and so on. Dr. Thomas Shipley will let you know just how long you need to wear each set, and you can even track your progress with every appointment.

So, are we predicting the future? Not really. When you use Invisalign, we are planning and creating your future smile. Dr. Thomas Shipley will use the Invisalign system to customize your treatment for your very specific needs, step by step, and aligner by aligner, until you attain the smile you previewed before you even started treatment.

But one thing we can predict: If you follow our recommendations, keep your appointments at our Peoria, AZ office, and wear your aligners as directed, there’s going to be a beautiful, healthy smile in your future.

Bite problems are so common that most of us know someone who’s worn braces. So perhaps you’re already familiar with the terms “overbite” and “underbite”—but if you’ve been diagnosed with an “overjet,” that just might be an orthodontic diagnosis that is new to you. If so, here are a few questions and answers to help promote overjet understanding.

Just what is an “overjet”?

An overjet is a type of malocclusion, which means that there’s a problem with your bite, the way your jaws and teeth fit together when you bite down. In a healthy bite, the front top teeth project slightly beyond, and slightly overlap, the bottom teeth. The key word here is “slightly.”

An overjet is a Class II malocclusion, which means that the upper front teeth project further beyond the lower teeth than they should. Overjets and overbites are both Class II malocclusions, and the words are often used interchangeably, but there’s a notable difference between the two conditions.

An overbite occurs when the top teeth overlap the bottom teeth too far vertically, and you can’t see as much of the lower teeth as you should when you bite down.

An overjet is considered more horizontal in nature, where the top teeth project at an outward angle toward the lips instead of pointing straight down toward the bottom teeth. This condition is sometimes called protruding or buck teeth.

What causes an overjet?

The reason for your overjet might be dental (caused by tooth alignment), or skeletal (caused by bone development), or a combination of both.

Overjets can run in families. They can also be caused by the size and position of your jaws and the shape and position of your teeth, all of which affect your bite alignment. But early oral habits, such as prolonged and vigorous thumb-sucking or pacifier use, can also contribute to overjet development.

How do we treat an overjet?

There are many types of treatment available. Dr. Thomas Shipley will recommend a treatment plan based on the cause and severity of your overjet. Because some treatments are effective while bones are still growing, age plays a part as well.

• Braces and Aligners

If you have a mild overjet, and minor dental issues are the main cause of the malocclusion, braces or clear aligners can effective.

• Functional Appliances

If the overjet is caused by a problem with upper and lower jaw development, devices called functional appliances can be used to help guide the growth of the jawbones while a child’s bones are still forming.

For young patients, there are several appliances which can help correct an overjet. Some, such as the Twin Block and the Forsus Spring appliances, work inside the mouth, while others, like headgear, are worn externally. Your orthodontist will recommend the most effective appliance for your needs.

• Surgical treatment

In some cases, where the malocclusion is skeletal in nature as well as dental, surgical treatment might be necessary to reshape the jawbone itself.

If we recommend surgery, oral and maxillofacial surgeons are experts in surgical procedures designed to create a healthy and symmetrical jaw alignment. Dr. Thomas Shipley will work with your surgeon to design a treatment plan, which will usually include braces or other appliances following surgery.

Why treat your overjet?

A serious, moderate, or even mild overjet can lead to many dental and medical problems, including:

• Concerns about facial and dental appearance
• Front teeth which are more at risk for injury
• Difficulty closing the lips
• Problems speaking or chewing
• Headaches, facial, and temporomandibular (jaw) joint pain

When you work with our Peoria, AZ team to correct your overjet, you’re not just correcting a problem. You’re also creating something—a healthy, comfortable bite, and an attractive, confident smile. We can talk about general answers to your overjet questions, but when it comes to understanding your very individual smile, Dr. Thomas Shipley will have all the answers you need to make that healthy bite and that confident smile a reality!